manualshive.com logo in svg

Clark S20 D, Руководство оператора

Поделиться
Скачать
Clark S20 D Скачать руководство пользователя страница 122

6-4

How to Tow a Disabled Truck

CAUTION

!

The power steering and brakes will not operate on the
disabled truck when the engine is not running. Manual
operation of the handwheel and brakes will be difficult to
operate. More manual effort will be required to perform
these functions.

9. Park the disabled truck in authorized areas only. Fully lower the

forks to the floor, put the directional control lever in the NEU-
TRAL position and turn the ignition switch to the OFF position.
Block the wheels to prevent the truck from rolling. With parking
brake disengaged, wheels must be blocked.

10. Tag truck out of service and remove key from ignition.

WARNING

!

Always engage the parking brake when parking a lift
truck. The truck can move and cause injury or death to
personnel near it. In the event that the parking brake must
be manually released, you must block the drive tires to
prevent movement.

Solid metal tow bar

Содержание S20 D











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды