Clark S20 D, Руководство оператора

Страница: 79 / 170

Section 3. Operator Compartment and Controls
Operator Controls 3-41
Operator Controls
Key/Start Switch
The Key/Start Switch:
• Turns the truck electrical system on and off.
• Connects and tests the warning indicator lights.
• Connects the starter motor circuit when engine is to be
started.
The Key/Start Switch has three positions.
When the key is in the vertical "OFF"
position, all truck electrical circuits are off,
and the key can be removed. From the
"OFF" position, the key can be turned
clockwise to the "START" position, where
the starter motor is engaged and part of
the truck electrical system is energized.
When the key is released from the "START" position, it automatically
returns to the "ON" position, where the starter is disengaged and the
entire truck electrical system is on.
Cold Start Preheating (Diesel Only)
With the switch in the "ON" position the warning indicator will light up
and the glow plugs pre-heat automatically. The engine can then be
started. To repeat the preheating process turn the key to the "OFF"
and then into the "ON" position.
Engine Stop
Run the engine at idling speed briefly before shutting it off.
Turn the key switch to the "OFF" position to shut the engine down.
OFF
ON
START