Clark CGC40 L, Руководство оператора

Страница: 92 / 128

7-6 Safe Maintenance Practices
22. Care must be taken to assure that all replacement parts, includ-
ing tires, are interchangeable with the original parts and of a
quality at least equal to that provided in the original equipment.
Parts, including tires, are to be installed per the manufacturer's
procedures. Always use genuine CLARK or CLARK-approved
parts.
WARNING
!
When removing tires follow industry safety practices. Most
importantly, deflate pneumatic tires completely prior to
removal. Following assembly of tires on multi-piece rims,
use a safety cage or restraining device while inflating.
23. Use special care when removing heavy components, such as
counterweight, upright, etc. Be sure that lifting and handling
equipment is of the correct capacity and in good condition.
IMPORTANT
Your new CLARK lift truck has been built to meet all appli-
cable mandatory requirements of ANSI / ITSDF B56.1
Safety Standard for Powered Industrial Trucks. Each truck
also includes certain safety devices—such as horn, over-
head guard,safety restraint system, seat belt and load
back rest—as standard equipment. No additions, omis-
sions, or modifications should be made that affect compli-
ance to the above requirements or in any way minimize
the effectiveness of the safety devices.