Clark CGC40 L, Руководство оператора

Страница: 91 / 128

Safe Maintenance Practices 7-5
Section 7. Planned Maintenance and Lubrication
14. Fuel systems must be checked for leaks and condition of parts.
Extra special consideration must be given in the case of a leak in
the fuel system. Action must be taken to prevent the use of the
truck until the leak has been corrected.
15. All hydraulic systems must be regularly inspected and main-
tained in conformance with good practice. Tilt and lift cylinders,
valves, and other parts must be checked to assure that "drift" or
leakage has not developed to the extent that it would create a
hazard.
16. When working on the hydraulic system, be sure the engine is
turned off, upright is in the fully-lowered position, and hydraulic
pressure is relieved in hoses and tubing.
WARNING
!
Always put oak blocks under the carriage and upright
rails when it is necessary to work with the upright in an
elevated position.
17. The truck manufacturer's capacity, operation, and maintenance
instruction plates, tags, or decals must be maintained in legible
condition.
18. Batteries, limit switches, protective devices, electrical conduc-
tors, and connections must be maintained in conformance with
good practice. Special attention must be paid to the condition of
electrical insulation.
19. To avoid injury to personnel or damage to the equipment, con-
sult the manufacturer's procedures in replacing contacts on any
battery connection.
20. Industrial trucks must be kept in a clean condition to minimize
fire hazards and help in detection of loose or defective parts.
21. Modifications and additions that affect capacity and safe truck
operation must not be done without the manufacturer's prior writ-
ten approval. Capacity, operation, and maintenance instruction
plates, tags, or decals must be changed accordingly.