www.clarksynthesis.com
Diluvio
™
Underwater Speaker
14
ISOLATION TRANSFORMER INSTALLATION
Place the Isolation Transformer
in a dry, indoor, location.
The transformer is not
designed to be mounted
outdoors.
Locate the speaker cable
from the amplifier. Remove
.75 in. (20 mm) of the cable’s
outer jacket.
Insert the positive wire
(usually white or red) to the
1+ terminal, and the negative
wire (usually black) to the 1-
connection. Tighten the 1+
and 1- screws.
Transformer may be mounted
to a wall using mounting
tabs. (The transformer is
heavy and must be securely
mounted to the wall.)
Remove .3 in. (8 mm) of
insulation from each wire.
Push the gray ring down
until it locks on the
connector’s body.
Locate the Neutrik Speakon
connector. Remove the
connector from the bag.
Place the Speakon
connector’s blue bushing on
the amplifier cable.
Screw the blue bushing onto
the connector’s body. The
connector is now assembled.
1
4
7
2
5
8
3
6
9
