www.clarksynthesis.com
Diluvio
™
Underwater Speaker
13
STAINLESS STEEL SCREEN INSTALLATION
Carefully remove the rubber
ring from face ring screw.
Save the rubber ring.
Place the bottom of the screen
into the face ring aligning the
feet around the tab. Note that
the smooth beveled side of the
screen should face outward
toward the front of the face
ring.
Remove the screw from the
face ring. Save the screw.
Push the screen all the way
into the face ring. You may
need to flex the screen in a
little to ensure a secure fit.
Carefully place the rubber
ring onto the face ring
screw.
Put on a pair of work gloves
to avoid being cut by the
screen’s sharp edges.
Insert the screw through the
face ring. There is a small
hole cut out for the screw in
the screen.
1
2
3
6
5
7
4
