TROUBLESHOOTING
The Unit Will Not Operate/No Dial Tone
s6ERIFYTHE4!,+"UTTONISLIT
s6ERIFYTHE!#ADAPTERISSECURELYPLUGGEDINTOTHE!#POWEROUTLETANDTHETELEPHONE
s6ERIFYTHETELEPHONELINECORDISSECURELYPLUGGEDINTOTHEWALLJACKANDTHETELEPHONE
s-AKESURETHEBASEANTENNAISINANUPRIGHTPOSITION
s-AKESURETHEHANDSETBATTERYISFULLYCHARGED
s6ERIFYTHETELEPHONEISINTHECORRECTDIALINGMODETONETOUCH ORPULSEROTARY
s-AKESUREYOUAREINTHEUSABLERANGEOFTHEBASESTATION
s2ESETTHESECURITYCODEBYPLACINGTHEHANDSETINTHEBASEFORSECONDS
The Phone Does Not Ring When You Receive a Call
s-AKESURETHE2).'%2SWITCHONTHEHANDSETANDBASEARESETTO/.
s6ERIFYTHE!#ADAPTERISSECURELYPLUGGEDINTOTHEBASEANDTHETELEPHONE
s6ERIFYTHETELEPHONELINECORDISSECURELYPLUGGEDINTOTHEWALLJACKANDTHETELEPHONE
s-AKESUREYOUAREINTHEUSABLERANGEOFTHEBASESTATION
s9OUMAYHAVETOOMANYEXTENSIONSONYOURLINE4RYUNPLUGGINGAFEWDEVICES
Noise, Static, Interference or Other Calls Heard while Using the Handset
s4RYCHANGINGCHANNELS
s-AKESURETHEBASEANTENNAISINANUPRIGHTPOSITION
s-AKESUREYOUAREINTHEUSABLERANGEOFTHEBASESTATION
s-AKESURETHEHANDSETBATTERYISFULLYCHARGED
s4RYRELOCATINGTHEBASEUNITTOANOTHERLOCATION
s-AKESURETHE!#ADAPTERISNOTPLUGGEDINTOTHEWALLOUTLETWITHOTHERAPPLIANCES
Phone Will Not Hold Charge
s-AKESURETHECHARGINGCONTACTSONTHEHANDSETANDBASEAREFREEOFDUSTANDDIRT
s#LEANTHECONTACTSWITHASOFTCLOTH
s-AKESURE#(!2'%,%$ONTHEBASEISLITWHENHANDSETISINTHECRADLE)FNECESSARY
replace the handset battery. (See Battery Information.)
Difficulty in Placing or Receiving Calls
s-OVECLOSERTOTHEBASEANDTRYAGAIN
s)FMOVINGCLOSERDOESNOTWORKYOUMAYHAVELOSTTHESECURITYCODE2ESETCODEBY
placing the handset back on the base for 5-10 seconds.
s-AKESUREYOUHAVESELECTEDTHECORRECTDIALINGMODETONEORPULSE
s-AKESURETHE!#ADAPTERISNOTPLUGGEDINTOAWALLOUTLETWITHOTHERAPPLIANCES
s$ISCONNECTFORSECONDSTHENRECONNECT0LACETHEHANDSETBACKONTHEBASEAND
reinsert the AC adapter.
s-AKESURETHEHANDSETBATTERYISFULLYCHARGED
WARRANTY SERVICE INFORMATION
The following warranty and service information applies only to products purchased and used in
the U.S. and Canada. For warranty information in other countries, please contact your local retailer
or distributor.
Limited Warranty
: Clarity, a division of Plantronics, Inc. (“Clarity”) warrants to the original
consumer purchaser that, except for limitations and exclusions set forth below, this product shall
be free from defects in materials and workmanship for a period of one (1) year from the date
of original purchase (“Warranty Period”). The obligation of Clarity under this warranty shall be
at Clarity’s option, without charge, of any part or unit that proves to be defective in material or
workmanship during the Warranty Period.
Exclusions from Warranty
: This warranty applies only to defects in factory materials and
factory workmanship. Any condition caused by accident, abuse, misuse or improper operation,
violation of instructions furnished by Clarity, destruction or alteration, improper electrical voltages
or currents, or repair or maintenance attempted by anyone other than Clarity or an authorized
service center, is not a defect covered by this warranty. Telephone companies manufacture different
types of equipment and Clarity does not warrant that its equipment is compatible with the equip-
ment of a particular phone company.
Implied Warranties
: Under state law, you may be entitled to the benefit of certain implied
warranties. These implied warranties will continue in force only during the warranty period. Some
states do allow limitations on how long an implied warranty lasts, so the above limitation may not
apply to you.
Incidental or Consequential Damages
: Neither Clarity nor your retail dealer or selling
distributors has any responsibility for any incidental or consequential damages including without
limitation, commercial loss or profit, or for any incidental expenses, expenses, loss of time, or
inconvenience. Some states do not allow exclusion or limitation of incidental or consequential
damage, so the above limitation or exclusion may not apply to you.
REGULATORY COMPLIANCE
Part 15 of FCC Rules Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Your equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against
harmful interference in residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation; if this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one of the following
measures:
1. Where it can be done safely, reorient the receiving television or radio antenna.
2. To the extent possible, relocate the television, radio or other receiver with respect to the
telephone equipment. (This increases the separation between the telephone equipment and the
receiver.)
3. Connect the telephone equipment into an outlet on a circuit different from that to which the
television, radio, or other receiver is connected.
4. Consult the dealer or an experienced Radio/TV Technician for help.
CAUTION:
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
Industry Canada Technical Specifications
This product meets the applicable Industry Canada technical specifications.
Before installing this equipment, users should ensure that it is permissible to be connected to the
facilities of the local telecommunications company. The equipment must also be installed using an
acceptable method of connection. In some cases, the company’s inside wiring associated with a single
line individual service may be extended by means of a certified connector assembly (telephone
extension cord). The customer should be aware that compliance with the above conditions may not
prevent degradation of service in some situations. Repairs to certified equipment should be made by an
authorized Canadian maintenance facility designated by the supplier.
Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power
utility, telephone lines and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
CAUTION:
Users should not attempt to make such connections themselves, but should contact the
appropriate electrical inspection authority, or electrician, as appropriate.
The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination
of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the
devices does not exceed five.
(The term “IC:” before the certification/registration number only signifies that the Industry Canada
technical specifications were met.)
This Class B digital apparaturs complies with Canadian ICES-003.
Privacy of communicaions may not be ensured when using this phone.
PARTY RESPONSIBLE FOR
REGULATORY COMPLIANCE
Clarity, A Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
Phone: 1-800-552-3368
User Guide
W425Pro
TM
Amplified
CordlessTelephone
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.clarityproducts.com
User Guide
W425Pro
TM
Amplified
CordlessTelephone
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.clarityproducts.com
User Guide
W425 Pro
TM
Amplified
CordlessTelephone
Clarity, a Division of Plantronics, Inc.
4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-552-3368
www.clarityproducts.com
W425 Pro™
IN USE CHARGE
W425 Pro™
CONTENTS & PARTS CHECKLIST
© 2007 Clarity, a division of Plantronics, Inc. All rights reserved. Amplifying your life, Clarity, the
amplification device, Clarity and the amplification device combined, Clarity Professional, W425
Pro Digital Clarity Power and DCP are trademarks or registered trademarks of Plantronics, Inc.
Rev. B (06-09)
Your package includes all the items as shown here. If there is anything missing,
please contact our Customer Care Department immediately.
NOTE:
PLEASE RETAIN A COPY OF PROOF OF PURCHASE FOR YOUR
RECORDS.
User guide
Mounting bracket
Telephone line cords
(one long cord and
one short cord)
Handset
DC adapter
Base unit
Battery Pack
WARRANTY SERVICE INFORMATION
Other Legal Rights
: This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
How to Obtain Warranty Service
: To obtain warranty service, please prepay shipment and return
the unit to the appropriate facility listed below.
In the United States
: Clarity Service Center, 4289 Bonny Oaks Drive, Suite 106, Chattanooga, Ten-
nessee 37406
Tel. (423) 629-3500 or (800) 552-3368; Fax: (423) 622-7646 or (800) 325-8871
In Canada
: Plantronics Service Center, 8112 Trans Canada Highway, Ville Saint-Laurent, Quebec H4S
1M5
Tel: (800) 540-8363 or (514) 956-8363, Fax: (514) 956-1825
Please use the original container, or pack the unit(s) in a sturdy carton with sufficient packing material
to prevent damage. Include the following information: A proof-of-purchase indicating model number
and date of purchase; Bill-to address; Ship-to address; Number and description of units shipped; Name
and telephone number of person to call, should contact be necessary; Reason for return and descrip-
tion
of
the
problem.
Damage occurring during shipment is deemed the responsibility of the carrier, and claims should be
made directly with the carrier.
REGULATORY COMPLIANCE
Part 68 of FCC Rules Information
a) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains, among other information, a product identifier
in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone
company.
b) A plug and jack used to connect this equipment to the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug, RJ11C USOC, is provided with this product. It is designed to be
connected to a compatible modular jack that is also compliant. See installation instructions for details.
c) The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the
number of devices that may be connected to a line, as determined by the total RENs, contact the local
telephone company. For products approved after July 23, 2001, the REN for this product is part of the
product identifier that has the format US:AAAEQ##TXXXX.
The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier
products, the REN is separately shown on the label.
d) If this telephone equipment causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. But if advance notice
isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be
advised of your right to file a complaint with the FCC if you believe it is necessary.
e) The telephone company may make changes in its facilities, equipment, operations or procedures
that could affect the operation of the equipment. If this happens the telephone company will provide
advance notice in order for you to make necessary modifications to maintain uninterrupted service.
f) If trouble is experienced with this telephone equipment, for repair or warranty information, please
contact Clarity, 1-800-552-3368. If the equipment is causing harm to the telephone network, the
telephone company may request that you disconnect the equipment until the problem is resolved.
g) This telephone equipment is not intended to be repaired and it contains no repairable parts. Opening
the equipment or any attempt to perform repairs will void the warranty. For service or repairs, call
1-800-552-3368.
h) Connection to party line service is subject to state tariffs. Contact the state public utility
commission, public service commission or corporation commission for information.
i) If your home has specially wired alarm equipment connected to the telephone line, ensure the
installation of this telephone equipment does not disable your alarm equipment. If you have questions
about what will disable alarm equipment, consult your telephone company or a qualified installer.
j) This telephone equipment is hearing aid compatible.
Customer-Owned Coin/Credit Card Phones:
To comply with state tariffs, the telephone company must be given notification prior to connection. In
some states, the state public utility commission, public service commission or corporation commission
must give prior approval of connection.
Belt Clip
