Turning On For Use In The Shower
•
Before starting shower, touch the logo on the mirror.
See Figure 7.
•
Logo will light up indicating the mirror is heating.
Figure 7. Power switch with LED Indicator
NOTE:
You can also shut off the mirror heater by
pressing the logo button.
NOTE:
If mirror does not turn on, remove the battery
and charge until the charger LED turns green.
REMOVING OR RELOCATING THE MIRROR
Tools Needed
•
Lever (a large screwdriver will work).
•
Fulcrum about 3/8” thick (3 paint sticks work).
•
Buffer (paper folded 2 times will work fine)
See Figure 8.
Removal Process
1.
Set up the tools as shown in a corner. Press down on the lever until you hear a pop.
2.
Move to adjacent corner and repeat.
See Figure 8.
3.
Lift the mirror to release the two remaining corners.
Figure 8. Removing the Clarity from the wall.
NOTE:
Removing the mirror is difficult and only necessary if you need to re-position.
•
The mirror will automatically turn off after 7 minutes
to preserve battery life.
•
A fully charged battery should last 7 to 10 cycles
before needing to be recharged.
Page 5