General Guidelines
•
Do not use outdoors.
•
Use this mirror/heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
•
Do not install if product is damaged.
•
Do not alter, submerge in water, or use for purposes other than described.
•
Contact ClearMirror for battery and other replacement parts.
•
SAVE THESE INSTRUCTIONS.
MOUNTING THE MIRROR
The Clarity is very easy to install. You will only need to apply four Dual Lock patches on the shower wall
and then mount the mirror to those patches.
1.
Determine desired Clarity height from the shower floor and mark. Use the template as a guide.
•
Clean the shower surface, remove any soap film and dirt and dry the mounting location.
•
Level and tape the wall template onto the shower surface.
See Figure 1
.
Figure 1. Determine mounting location.
NOTE:
Position the mirror away from direct shower spray for best results.
2.
Prepare the openings for Dual Lock patches.
•
Clean all four surface openings with alcohol wipes provided. The cutout
corners are the openings.
See Figure 2.
Allow 1–2 minutes to dry.
Figure 2. Clean with alcohol wipes provided.
NOTE:
Carefully plan placement of the mirror. 3M Dual Lock patches are difficult to remove
and are not reusable.
CAUTION:
Failure to follow mounting instructions will void the warranty.
WARNING:
Failure to follow mounting instructions could cause mirror to fall resulting in serious injury.
Page 2