MOUNTING THE MIRROR, CONT.
8.
Remove the battery and set aside. Grab each side of the battery and push away from the
mirror. Then pull down and out of the mirror to disengage.
9.
Position the Clarity over the Dual Lock patches on the wall. Position logo in bottom left corner.
10. Use a small level on top of the mirror frame to level.
See Figure 5.
11. Push hard on the outside corners until you
hear
and
feel each corner snap
together.
Figure 5. Position, level and snap in place.
NOTE:
Carefully position and level the mirror. Once the mirror is snapped on with 3M Dual Lock
patches, the mirror is difficult to remove.
GENERAL OPERATING INSTRUCTIONS
Charge The Battery
1.
Remove yellow patch from battery.
See Figure 6.
2.
Plug in until fully charged. Green LED indicates full charge.
3.
Unplug the battery and insert into the mirror. Slide up into opening until it clicks in place.
Figure 6. Charging the battery and inserting in mirror.
Page 4