Clarion VXZ766, Руководство пользователя

Страница: 41 / 51

OPERATIONS
VXZ766
41
English
Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA
TITLE.
• The factory default setting is “
ON ”.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the display
adjust mode.
2. Move the [ ] / [ ] lever to select
“ SCROLL ”.
3. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
z
ON:
Scrolls automatically.
z
OFF:
Scrolls just 1 time when the title was changed or
you press and hold the [
TITLE ] button for 1
second or longer.
4. Press the [ DISP ] button to return to the
previous mode.
Dimmer control
You can set the dimmer control.
• The factory default setting is “
ON ”.
1. Press and hold the [ DISP ] button for 1
second or longer to switch to the display
adjust mode.
2. Move the [ ] / [ ] lever to select
“ DIMMER ”.
3. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
4. Press the [ DISP ] button to return to the
previous mode.
Adjust Mode
Anti-theft indicator
The red Anti-theft indicator is a function for
detering theft. When the DCP is removed from
the unit, this indicator blinks.
• The factory default setting is “
OFF ”.
1. Press the [ ADJ ] button to switch to the adjust
mode.
2. Move the [ ] / [ ] lever to select “ LED ”.
3. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
4. Press the [ ADJ ] button to return to the
previous mode.
Setting the low pass filter
• This function can only be adjusted when the
subwoofer output is set to “ ON ” and the speaker
system is set to “ 5.1ch ”. For details on how to set
the subwoofer, refer to the subsection “Turning
on/off speakers” (P. 36) in the section
“Changing Initial Settings such as Menu
Language, etc.”
.
• This function cannot be adjusted when as follows:
“ Pro Logic ” is set to “ ON ”, the speaker system is
set to “ 5.1ch ”, DVD/DTS-CD is being played.
• The factory default setting is “ THROUGH ”. If the
speaker system is set to “ 5.1ch ”, the factory
default setting is “ 50Hz ”.
1. Press the [ ADJ ] button to switch to the adjust
mode.
2. Move the [ ] / [ ] lever to select “ SW
LPF ”.
3. Turn the [ ROTARY ] knob to select the setting.
Each time you turn the [ ROTARY ] knob, the
setting changes in the following order:
THROUGH
➜
50Hz
➜
80Hz
➜
120Hz
4. Press the [ ADJ ] button to return to the
previous mode.
Setting the amplifier bypass circuit
• The factory default setting is “ OFF ”.
1. Press the [ ADJ ] button to switch to the adjust
mode.
2. Move the [ ] / [ ] lever to select “ AMP
CNCL ”.
3. Turn the [ ROTARY ] knob to select “ ON ” or
“ OFF ”.
z
ON:
Uses with connected AMP.
z
OFF:
Uses with inside AMP.
4. Press the [ ADJ ] button to return to the
previous mode.
VXZ766.book Page 41 Monday, January 16, 2006 6:43 PM