Clarion VXZ766, Руководство пользователя

Страница: 18 / 51

OPERATIONS
18
VXZ766
English
Adjusting the bass
(Gain, Frequency, Q-curve)
• This function cannot be adjusted when as follows:
“ Pro Logic ” is set to “ ON ”, the speaker system is
set to “ 5.1ch ”, DVD/DTS-CD is being played.
• This adjustment can only be performed when the
Z-Enhancer Plus is set to “ CUSTOM ”.
1. Press the [ A-M ] button and select “ BASS ”.
2. Turn the [ ROTARY ] knob to adjust the bass.
• The factory default setting is “ B<G 0> ”.
(Adjustment range: -6 to +8)
3. Move the [ ] / [ ] lever to select
“ B<F 50> ”.
4. Turn the [ ROTARY ] knob to select the
frequency.
• The factory default setting is “ B<F 50> ”.
(Adjustment 50/80/120 Hz)
5. Move the [ ] / [ ] lever to select
“ B<Q 1> ”.
6. Turn the [ ROTARY ] knob to select the
Q-curve.
• The factory default setting is “ B<Q 1> ”.
(Adjustment 1/1.25/1.5/2)
7. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the treble
(Gain, Frequency)
• This function cannot be adjusted when as follows:
“ Pro Logic ” is set to “ ON ”, the speaker system is
set to “ 5.1ch ”, DVD/DTS-CD is being played.
• This adjustment can only be performed when the
Z-Enhancer Plus is set to “ CUSTOM ”.
1. Press the [ A-M ] button and select “ TREBLE ”.
2. Turn the [ ROTARY ] knob to adjust the treble.
• The factory default setting is “ T<G 0>
”.
(Adjustment range: -6 to +6)
3. Move the [ ] / [ ] lever to select
“ T<F 12K> ”.
4. Turn the [ ROTARY ] knob to select the
frequency.
• The factory default setting is “ T<F 12K> ”.
(Adjustment 8 kHz/12 kHz)
5. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the balance
• This function cannot be adjusted when as follows:
“ Pro Logic ” is set to “ ON ”, the speaker system is
set to “ 5.1ch ”, DVD/DTS-CD is being played.
1. Press the [ A-M ] button and select “ BAL 0 ”.
2. Turn the [ ROTARY ] knob to adjust the
balance of the left and right speakers.
• The factory default setting is “ BAL 0 ”. (Adjustment
range: L13 to R13)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
Adjusting the fader
• This function cannot be adjusted when as follows:
“ Pro Logic ” is set to “ ON ”, the speaker system is
set to “ 5.1ch ”, DVD/DTS-CD is being played.
1. Press the [ A-M ] button and select “ FAD 0 ”.
2. Turn the [ ROTARY ] knob to adjust the
balance of the front and rear speakers.
• The factory default setting is “ FAD 0 ”. (Adjustment
range: F12 to R12)
3. When the adjustment is complete, press the
[ A-M ] button several times until the function
mode is reached.
VXZ766.book Page 18 Monday, January 16, 2006 6:43 PM