Clarion VXZ766, Руководство пользователя

Страница: 21 / 51

OPERATIONS
VXZ766
21
English
DVD Operations
!
WARNING
About a Single CD/DVD (8cm DISC)
• Since the unit is not compatible with a
single CD/DVD, do not load it into the unit.
• Keep in mind the fact that a single CD/DVD
cannot be played even using a single
CD/DVD adaptor for the unit.
• If you try to push it into the unit forcibly
without removing it, the CD/DVD cannot be
ejected. This will result in damage to the
mechanism. Please never do this.
Loading a disc
1. Press the [ OPEN ] button to access the
DVD/CD SLOT behind the FLIP DOWN
PANEL.
2. Insert a DVD/CD into the center of the
DVD/CD SLOT with the label side facing up.
The DVD/CD plays automatically after
loading.
Notes:
• Never insert foreign objects into the DVD/CD
SLOT.
• If the disc is not inserted easily, there may be
another disc in the mechanism or the unit may
require service.
3. Close the FLIP DOWN PANEL.
!
CAUTION
Be careful not to catch your hand or fingers
while closing the FLIP DOWN PANEL.
Notes:
• If the FLIP DOWN PANEL does not open fully,
gently open with your hand.
• After loading a CD, always close the FLIP DOWN
PANEL.
Eject function
Just pressing the [ ] button ejects the disc
even if the power to the unit was not turned on.
1. Press the [ OPEN ] button to open the FLIP
DOWN PANEL.
Note:
• If the FLIP DOWN PANEL will not open far
enough, open it gently with your hand.
2. Press the [ ] button. Remove the disc after
it is ejected.
3. Close the FLIP DOWN PANEL.
Note:
• Always close the FLIP DOWN PANEL once you
take out the disc.
! CAUTION
• Do not try to put your hand or fingers in the
disc insertion slot. Also never insert
foreign objects into the slot.
• Do not insert discs where adhesive comes
out from cellophane tape or a rental CD
label, or discs with marks where
cellophane tape or rental CD labels were
removed. It may be impossible to extract
these discs from the unit and they may
cause the unit to break down.
Listening to a disc already loaded in
the unit
1. Press the [ SRC ] button to select the DVD
mode.
When the unit enters the DVD mode, play
starts automatically.
If there is no disc loaded, the indication
“ NO
DISC ” appears in the display.
Note:
• The message “ INVALID ” will appear in the monitor
when button operation is invalid.
VXZ766.book Page 21 Monday, January 16, 2006 6:43 PM