Clarion NX405E, Руководство пользователя

Страница: 40 / 153

39 NX405E
English
English
Owner’
s Manual
English
Owner’
s Manual
14. TUNER OPERATIONS
The tuner in this head unit contains RDS (Radio Data
System) in FM band.
Listening to the Tuner
1. Touch the [Tuner] button on the main menu display.
The tuner mode screen is displayed.
2. Touch the [FM1/FM2/FM3/AM] button to select the
radio band. Each time the button is touched, the radio
reception band changes in the following order:
FM1->FM2->FM3->AM -> FM1...
10 9
11
12
7 8
2 3
4
6
5
1
13
1 - Preset Scan button
2 - Seek down button
3 - Seek up button
4 - Step down button
5 - Step up button
6 - Frequencies display
7 - System time
8 - Bluetooth status indicator
9 - Preset channel list
10 - DX/Local indicator
11 - Band button
12 - Shortcut button
13 - Option button
Seek Tuning
1. Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] button
• When touch the [ ] button, the station is searched in
the direction of higher frequency.
• When touch the [ ] button, the station is searched in
the direction of lower frequency.
Step Tuning
1. Touch the [FM1/2/3/AM] button to select the radio
band (FM or AM).
2. Touch the [ ] or [ ] button in frequency menu to
tune up or down by one step.
Recalling a preset station
1. Touch the [FM1/2/3/AM] button to select the desire
band (FM or AM) on the tuner.
2. Press the preset station (1 to 6) on Preset list.
Manual memory
1. Touch the desired band button to select the band you
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Touch and hold the desired Preset button you want to
store for about 2 seconds.
RDS Function Setting
Press the Option [ ] to set the RDS operation.
Note:
The RDS operation does not work during AM radio
reception.
1. TA (Traffic Announcement) Function
When a traffic announcement broadcast starts during
the TA standby mode, the traffic announcement
broadcast is received as higher priority regardless of the
current function mode, so you can listen to it. The Traffic
Program (TP) automatic tuning is also available.
Setting TA Standby Mode
Turn TA switch to ON, TA standby mode is set and “TA”
will be displayed at the top of the screen.
When an RDS broadcast station with traffic
announcement program is received, “TP” will be
displayed at the top of the screen.
Note: If no TP station is received this system continues
the search operation. Performing the above procedure
again makes the “TA” turns to off, and stops TP station
searching.
Canceling a Traffic Announcement
Broadcast
Press the [Cancel] button while a Traffic Announcement
broadcast is being received. The Traffic Announcement
broadcast reception is canceled, and the system goes
into the TA standby mode.
Canceling TA Standby Mode
When “TA” is displayed on the screen, turn TA switch to
OFF, “TA” on the screen goes off, and the TA standby
mode is canceled.
Volume Setting of TA
The volume of TA can be set during TA interruption.