Operations Common to Each Mode
English
37
DXZ788RUSB
●
Performing a system check
2-1. Select “
SYSTEM CHECK
”.
3-1. Press and hold the [
] button for 1
second or longer.
“
SYSTEM CHECK
” appears in the display,
then the unit returns to the speaker system
selecting mode.
AUX function
This system has an external input cable so you
can listen to sounds and music from external
devices connected to this unit.
●
Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
∗
The factory default setting is “
MID
”.
1. Press the [
OPTION
] button, “
AUX SENSE
MID
” appears in the display.
2. Push the [
P.CH
] button upward or downward
to select “
LOW
”, “
MID
” or “
HIGH
”.
Note:
• When AUX mode is selected, AUX IN sensitivity
can be set.
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD and CD changer.
The number of titles that can be entered for
each mode are as follows.
1. Press the [
SRC
] button to select the mode
you want to enter a title (CD or CD changer).
2. Select and play a CD in the CD changer for
which you want to enter the title.
3. Press the [
OPTION
] button.
4. Push the [
SEEK PANEL
] leftward or
rightward to select “
TITLE INPUT
”.
5. Press the [
] button.
The display switches to the title input display.
6. Push the [
SEEK PANEL
] leftward or
rightward to move the cursor.
7. Press the [
MENU
] button to select a
character type. Each time you press the
[
MENU
] button, the character type changes
in the following order:
Capital letters
➜
Small letters
➜
Numbers/
Symbols
➜
Umlaut
➜
Capital letters…
8. Push the [
P.CH
] button upward or downward
to select the desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10.Press and hold the [
] button for 2
seconds or longer to store the title into
memory.
Clearing titles
1. Select and play a CD in the CD changer for
which you want to clear the title.
2. Press the [
OPTION
] button.
3. Push the [
SEEK PANEL
] leftward or
rightward to select “
TITLE INPUT
”.
4. Press the [
] button.
The display switches to the title input display.
5. Press and hold the [
MENU
] button for 1
second or longer.
All characters in the title disappear.
6. Press and hold the [
] button for 2
seconds or longer to store the setting.
Mode
Number of titles
CD mode
50 titles
CD changer mode
Number of titles
DCZ628 connected
100 titles
01_DXZ788RUSB_EN.book 37 ページ 2007年11月27日 火曜日 午後6時34分