Clarion DXZ788RUSB, Руководство пользователя

Страница: 15 / 388

Basic Operations
English
15
DXZ788RUSB
Adjusting Sound Mode
●
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
“ S-W VOLUME ” can be adjusted only when
“
SUB WOOFER
” is set to “
ST
” or “
MONO
”
(page 22).
2-1. Select the “ S-W VOLUME ”.
3-1. Push the [ P.CH ] button upward or
downward to change the output volume.
∗
The factory default setting is “ 0 ”.
(Setting range: +6 to –6)
●
Setting the Digital Z-Enhancer
This unit are provided with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
∗
The factory default setting is “ DZE OFF ”.
2-1. Select the “ DZE ”.
3-1. Press the [ ] button.
3-2. Push the [ SEEK PANEL ] leftward or
rightward to select the tone effect. Each
time you push the [
SEEK PANEL ], the tone
effect changes in the following order:
“ DZE OFF ”
↔
“ DZE 1 ”
↔
“ DZE 2 ”
↔
“ DZE
3 ”
DZE OFF : No sound effect
DZE 1 : Suitable for genuine speakers
DZE 2 : Suitable for separate
speakers
DZE 3 : Suitable for co-axial speakers
3-3. When the “ DZE 1 ”, “ DZE 2 ” or “ DZE 3 ” is
set, push the [ P.CH ] button upward or
downward to change the DZE level from +3
to –3.
∗
The factory default setting is “ 0 ”.
To change sound mode
1. Press the [ ] button and select the sound
mode to adjust.
2. Push the [ SEEK PANEL ] leftward or
rightward to select the “item name”.
When speaker system is “ NORMAL ”:
“
S-W VOLUME
”
↔
“
DZE
”
↔
“
P.EQ
”
↔
“ BASS ”
↔
“ TREBLE ”
↔
“ S RESTORER ”
↔
“ HPF ”
↔
“ S-W LPF ”
↔
“ BALANCE ”
↔
“ FADER ”
When speaker system is “ 3WAY ”:
“ S-W VOLUME ”
↔
“ DZE ”
↔
“ P.EQ ”
↔
“ BASS ”
↔
“ TREBLE ”
↔
“ S RESTORER ”
↔
“ BALANCE ”
When speaker system is “ 2WAY ”:
“ DZE ”
↔
“ P.EQ ”
↔
“ BASS ”
↔
“ TREBLE ”
↔
“ S RESTORER ”
↔
“ BALANCE ”
↔
“ FADER ”
3. Push the [ P.CH ] button upward or
downward to select the “desired setting
value”.
∗
In the case of item names appearing with
the “
ENT
” suffix after the item name, the
[ ]
button must be pressed to display
the setting value.
∗
“ P.EQ ” can be adjusted only when the
“ P.EQ ON/OFF ” is set to “ ON ” (page 22)
and “ EQ SELECT ” is set to “ P.EQ ” (page
22).
∗
“ BASS ” and “ TREBLE ” can be adjusted
only when “ DZE ” is set to “ DZE OFF ” (page
15) and “ EQ SELECT ” is set to “ B/T ” (page
22).
∗
After completing settings, press the
[ ]
button to return to the previous mode.
Note:
• During sound adjustment mode, if no
operation is performed for more than 10
seconds, this mode can be canceled and
return to the previous mode.
01_DXZ788RUSB_EN.book 15 ページ ２００７年１１月２７日 火曜日 午後６時３４分