Clarion DB625MP, Руководство пользователя

Страница: 9 / 80

280-7815-00
DB625MP
13
6. OPERATIONS
Basic Operations
Power
●
Turning ON the Power
Press the [ FNC ] button.
●
Turning OFF the Power
Press the [ FNC ] button for at least 1 second.
Selecting the Source
Press the [ FNC ] button.
Source required Display
Tuner “TUNER”
CD “CD”
Standby “ALL OFF”
(Illumination only mode)
Volume
●
Increasing Volume
Press the [ ] button.
●
Decreasing Volume
Press the [ ] button.
Mute
Turning the volume down quickly.
Press the [ MUTE ] button.
Each time the button is pressed the Mute turns
ON or OFF.
When it’s ON, the “ MUTE ” indicator blinks.
Loudness
Compensating for low and high tones during low
volume.
Press the [ MUTE ] button for at least 1 sec-
ond.
Each time the button is pressed for at least 1
second the Loudness turns ON or OFF.
When it's ON, “ LOUD ON ” is displayed.
Beat EQ Light
You can recall the best sound setting preset for
different types of the music.
1. Select the source to set
Press the [ FNC ] button.
2. Select the Sound type
Press the [ BEQ LIGHT ] button.
Each time the button is pressed the sound set-
ting switches.
Sound setting Display
User memory “User”
Rock “Rock”
Pops “Pops”
Easy “Easy”
Top 40 “Top40”
Jazz “Jazz”
Flat “Flat”
Notes:
• User memory: The values set on the <Audio
Mode>.
• Each setting value is changed with the <Speaker
Setting>. First, select the speaker type with the
Speaker setting.
Audio Mode
1. Select the source for adjustment
Press the [ FNC ] button.
2. Enter Audio mode
Press the [ BEQ LIGHT ] button for at least 1
second.
3. Select the Audio item for adjustment
Press the [ FM ] or [ AM ] button.
Each time the button is pressed the items that
can be adjusted switch as shown below.
4. Adjust the Audio item
Press the [
a
] or [
d
] button.
Adjustment
Item
Display Range
Bass level “Bas” –8 ~ +8
Middle level “Mid” –8 ~ +8
Treble level “Tre” –8 ~ +8
Balance “Bal” Left 15 ~ Right 15
Fader “Fad” Rear 15 ~ Front 15
Volume offset “V-OFF” –8 ~ ±0
Note:
• Volume offset: Each source’s volume can be set
as a difference from the basic volume.
5. Exit Audio mode
Press the [ BEQ LIGHT ] button.
Note: Be sure to read this chapter referring to the front diagrams of
chapter “
2. CONTROLS ” on page 5 (unfold).
280-7815-00_009-030 (En) 4/2/02, 4:58 PM 13