Doc ID - 1234
• Rev 10
2 / 24
Supported models
The following Schlage models are supported.
•
BE369
•
BE468NX
•
BE469NX
•
FE599NX
Note:
The B3369, BE468NX, and BE469NX are manufacturer discontinued
(12/2018). These locks are Clare Supported.
Installing and programming Schlage door locks
Only qualified installation technicians should install Schlage door locks. Follow
the installation and programming instructions that came with your Schlage
equipment. We recommend that you pair the lock with the ClareHome Z-Wave
controller before installing it in the door.
Notes
•
The door lock must be within 6 feet of the controller to pair.
•
The door lock is configurable using the Clare app, the Clare Controls Install
Assist app, and Fusion.
Pairing, configuring, and removing the Schlage
After installing the door lock, pair it.
To pair the door lock using ClareHome or Install Assist:
1. Access the Clare Controls Install Assist app, and then tap
Add Devices
.
– or –