Clare Controls CM-MT8810-BT-70, Руководство пользователя, Страница: 25 / 40

HDBaseT 8x8 Matrix Switcher User Guide 19
/+[Y]/[X]:******. Set communication between PC and HDBaseT Receiver.
Y is for port.
Y = 1, 2, 3, 4, 5, 6, 7, or 8, means to send the command
in a given baud rate to the corresponding HDBaseT
receiver.
Y = 9, means to send the command to all connected
HDBaseT receivers.
Y = A, B, C, D, E, F, G, or H, means to send the
command to the corresponding HDBaseT receiver only
when in normal mode.
Y = E, F, G or H, means to send the command to the
corresponding HDBaseT receiver only when in standby
mode.
X is for baud rate. Value ranges from 1 to 7.
1 = 2400, 2 = 4800, 3 = 9600, 4 = 19200, 5 = 38400,
6 = 57600, and 7 =115200)
***** is for the data (max 48 Byte)
The symbol “.” is the end of one command. If there are
some symbols with “.” in one command, then this case is
allowed and the last one is the end of this command.
EDIDH[x]B[y]. Study the EDID from output port [x] to input port [y]. If the
EDID data is effective and the audio portion does not
support PCM mode, then force-set it to support PCM
mode only. If the EDID data is not effective, then set it as
initialized EDID data.
EDIDPCM[x]. Set the audio portion of input port [x] to PCM format in the
EDID database.
EDIDG[x]. Get EDID data from the output port and display the output
port number of X.
EDIDMInit. Recover the factory default EDID data.
EDIDM[X]B[Y]. Manual EDID switching. Enable input [Y] to study the
EDID data of output [X]. If the EDID data is not effective,
then set it as initialized EDID data.
EDIDUpgrade [x]. Upgrade EDID data via the RS232 port.
[X] is for input port, when the value of X is 9, it means to
upgrade all input ports. When the switcher receives the
command, it will show a message to prompt you to send
EDID file (.bin file). Operations are canceled after 10
seconds. End all connections of HDBaseT ports.