Clare Controls CM-MT8810-BT-70, Руководство пользователя, Страница: 20 / 40

14 HDBaseT 8x8 Matrix Switcher User Guide
When the IR receiver is connected with the HDBaseT receiver, or the IR ALL IN port
of the switcher is not with IR carrier, send the command “%0901.” You are then able
to transfer the IR signal to the IR OUT port.
Control far-end output device from local
When needed to control a remote displayer from local, the IR receiver used must be
with IR carrier. The IR signal is transferred to the corresponding zone connected with
the HDBaseT receiver connected to the IR transmitter. When the IR receiver is
connected to the IR ALL IN port, the IR signal is transferred to all the eight IR
transmitters connected to HDBaseT receivers.
Figure 4: Locally control remote devices
Control far-end device through IR ALL IN port
The IR signal received from the IR ALL IN port is transmitted to all the eight far-end
HDBaseT receivers connected to HDBaseT ports of the switcher.