Clare Controls CM-MT8810-BT-70, Руководство пользователя, Страница: 14 / 40

8 HDBaseT 8x8 Matrix Switcher User Guide
Connection procedure
1. Connect the HDMI sources (e.g., DVD) to the HDMI inputs of the switcher using
HDMI cables.
2. Connect the HDMI displayers (e.g., HDTV) to the HDMI outputs of the switcher
using HDMI cables.
3. Connect amplifiers or AVRs to the AUDIO output ports (3p captive screw
connectors).
4. Connect the HDBaseT port of receiver and the switcher with a twisted pair.
5. Connect the RS232 port (9 pin female D) of the switcher with a control device
(e.g., PC).
6. Connect the RS232 port of controlled device to any other RS232 port (3p
captive screw connector) of the switcher. The control signal can be transmitted
bi-directionally.
7. The switcher can be controlled through its built-in IR receiver, or through the IR
EYE port connected with an external IR receiver. The IR signal can also be
transmitted bi-directionally (connect IR OUT port to the IR IN port of other far-
end IR device, and connect the IR IN ports to the IR OUT port of other far-end IR
device).
Note: The IR IN port has built-in infrared carrier receiver.
8. Connect the 100 to 240 VAC power to the switcher.
System applications
The switcher is useful in any scenario when an HDMI signal (along with control
signals) must be transmitted reliably across greater distances than is practical using
traditional HDMI cables. It can be used in both residential and commercial
applications when centrally locating the source equipment and displaying HD video
in remote locations. The switcher allows the sharing of source content across
multiple displays.
System operations
The button operation examples are showed in “Front panel” on page 2. Here we
make a brief introduction to the system inquire operations.
I/O control
Convert an input to an output.
Example: Input 1 to output 2.