Clare Controls CM-MT8810-BT-70, Руководство пользователя, Страница: 16 / 40

10 HDBaseT 8x8 Matrix Switcher User Guide
To set the EDID data of one input port, press EDID and hold for 3 seconds to enter in
EDID setting statues, and then press O SELECT.
Example: Set the EDID data of INPUT 4 to the forth type of EDID data.
Operation: Press EDID + 4 + 4 + SELECT
To set the EDID data of all input ports, press EDID and hold for 3 seconds to enter in
EDID setting statues, and then press O SELECT.
Example:
Set the EDID data of all input ports to the second type of EDID data.
Operation:
Press
EDID + 2 + SELECT
Note:
Each button will flash for two times when the data copies successfully, and
then extinguishes. Should the operation fail, each button quickly flashes for 3
seconds.
Status check
To access the System Inquire menu, press SELECT for 3 seconds. Use the left and
right direction buttons to navigate checking previous and next item.
Table 3: Examples of front panel operations
Function items
Example Description
Check the connection
status of inputs
Y means the corresponding port is
connected with input device. N means it
is not.
Check the connection
status of outputs
Y means the corresponding port is
connected with output device. N means
it is not.
Correspondence between
inputs and outputs
Shows the correspondence between the
eight inputs and eight outputs.
Check if the input is with
HDCP
Y means the input signal is with HDCP.
N means it is not.
Check if the output is with
HDCP
Y means the output signal is with HDCP,
N means it is not.
Check the output
resolution
Use ▲▼ to check all eight output
resolutions.