Claind N2 LCMS 1, Руководство пользователя

Страница: 16 / 24

Use
16
6.8.
Parameter settings
”Editing” mode enables the display and entry of parameters that govern gene-
rator operation. They are divided into four categories, with two accessible by the
operator: mode and maintenance
6.8.1.
Editing mode parameters
These parameters select the operating mode of the generator, They comprise:
For access to these parameters, the generator must be switched on by pressing
and holding the Function key
for a few seconds.
The data will be displayed in sequence as shown in the table above.
To modify the value, use arrow keys
.
To acquire the set value, press and hold key and press an arrow
key; this confirms the value and moves to the next parameter.
To exit this menu, press and hold the Function key
for a few seconds.
6.8.2.
Editing maintenance parameters
See Maintenance section.
Language of messages
Italian
English
German (in preparation)
French
Spanish (in preparation)
Production restart after incorrect switch off
Manual
Automatic
Incorrect switch off alarm
Enabled
Disabled