‑ ‑
properly seated in its groove in the Filter Housing.
Place the housing and base right side-up with the
faucet pointing into the sink. Allow to stand for 15
minutes.
9.
After allowing the CleanSource Drinking Water
System to stand for 15 minutes, rinse the chlorine
solution from the system by turning on the COLD
WATER faucet and opening the Diverter Valve to
the system. The system will be adequately rinsed
after approximately five minutes, or when no
chlorine smell is present. Turn off the water.
10.
Hold the system upside down, unscrew the Filter
Housing by turning clockwise and empty.
11.
Insert the replacement UltraCarb Ceramic Filter
into the base by applying a downward pressure,
then twisting the UltraCarb filter to slide it into
place (
Figure 10
).
12.
Turning clockwise, screw the Filter
Housing back into the Base Assembly.
Figure 10
