‑ ‑
Figure 8
RePlaCe: The red warning light indicates the
filter capacity is exhausted. Replace the UltraCarb
Ceramic Filter before continuing to use your
system.
CleaNING THe UlTRaCaRB CeRaMIC FIlTeR
Clean the UltraCarb Ceramic Filter whenever the
water flow falls below an acceptable rate. Sanitary
precautions should be taken whenever handling
soiled components of your filter. We suggest using
waterproof gloves.
1.
There will be water in the Filter Housing.
To reduce spillage, invert the filter over
the sink. (
Figure 7
)
2.
While holding the base firmly, unscrew
the filter housing from the base assembly
by turning in a clockwise direction
(
Figure 8
). Drain out the water and set the
housing aside.
3.
Turn the filter base right-side up, then
remove the UltraCarb Ceramic Filter
from the base by pulling it up with a
twisting motion. (
Figure 9
)
4.
Dampen and scrub the UltraCarb
Ceramic Filter with a scouring pad (
item
Figure 7
