Claas TUCANO 500, Информация и базовые настройки поля

Страница: 24 / 48

24
Service Maintenance
Correct tension is achieved when the
ends of [D] are end to end. To tension
the belt, slacken nut [K] from [M] and
wind [M] in a clockwise direction until
the ends of [D] meet, then lock nuts
[M] and [K]. If the belt needs removing,
please consult the ‘drives section’ of
the Operator’s Manual.
Pump drive belt tension is done with a gold tube type tensioner.
Check distance Y is 205mm - if it is loose then adjust as follows:
Slacken off nut [6], slacken off [4], tighten nut [6] until the tube makes contact at
position [A]. The tube must just be able to rotate. Tighten [4] to lock nut [6].
Gauge rod type:
4