Claas TUCANO 500, Информация и базовые настройки поля

Страница: 29 / 48

29
EASY
Losses
Settings
Cab Contr
ols
Settings: Cutterbar
Service Maintenance
Check that the knife is in good condition in order for it to work effectively.
This involves replacing damaged or broken sections.
The table auger is important for the
transportation of material to the front
elevator.
The timing of the retractable
fingers can be adjusted for different
crops by opening up the guard on the
RHS of the cutterbar and adjusting the
lever with a spanner. Use the top holes
for short crops and the lower holes for
tall crops. The third hole from bottom
is the standard setting.
If an issue occurs with crop
wrapping around the table auger in
difficult conditions, there are
a number of procedures that can be
carried out (try one thing at a time):
Adjust the stripper plates behind the
auger. There is also a second scraper
under the auger that can be accessed
over the top of the auger.
Table auger: Crop wrapping:
Remove any knife play by adjusting the keeps, and make sure
that the fingers are not rounded or bent. A cleaner cutting knife
will reduce stress on the knife drive.
Tip: