Claas K5D00100, Руководство по ремонту

Страница: 95 / 252

3.22 TRANSMISSION
When the KICK-DOWN button is pressed, the
machine will change down a gear. The kick-down
function will only be cancelled by the following
actions:
1. The KICK-DOWN button is pressed again.
2. The direction of travel is changed.
3. The gear selected is changed.
If the KICK-DOWN button is pressed but the speed is
too high to change down, the gear will not be
changed. The APC will wait for up to 5 seconds for
the speed to drop. If the speed does not drop
sufficiently, the command to change down is
disregarded.
Automatic gear change
The 6/3 Gearbox has automatic shifting in the higher
gears. This system is controlled by the APC. It uses
the signal from the gearbox speed sensor to control
the engagement of 5th and 6th gears when the lever
is in the automatic mode (A). If the lever is in 5th, the
APC will control the engagement of 5th gear only.
Kick-down
When in the test mode the APC automatically scrolls
through all the output test (1 through 8). Pins 3, 8
and 9 are not active. When they are tested the
display should indicate an open circuit (O).
g n i d a e R y a l p s i D n i P t u p t u O C P A s k r a m e R n i d e w e i v t u p t u o l a m r o N
C P A
1 6 s d r a w r o F V M E G 1
2 7 e s r e v e R V M E G 2
3 4 1 V M E G 3
4 5 2 V M E G 4
5 9 d e s U t o N O 5
6 3 1 r e t t il p S V M E o t l a n g i S G 6
7 8 d e s U t o N 0 7
8 3 d e s U t o N 0 8