Model XP2F
Installation, Operation, and Maintenance Manual
N-XP2F IOM V1.0-4.5
Page 15 of 35
4.4
Setup
The following sub sections define what shows in the settings on each screen and provide detailed
descriptions when necessary.
4.4.1
Initial Configuration
After the XP2F components are installed and wired, provide power to the X35 calculation module.
Configure the unit following the steps below.
1.
Starting at the home screen, use the navigation arrows to highlight “Setup” as shown below and
press OK.
Figure 4.11
2.
Select “DPM Setup”
Figure 4.12
