CLA-VAL XP2F, Инструкция по установке, эксплуатации и обслуживанию

Страница: 12 / 35

Model XP2F
Installation, Operation, and Maintenance Manual
N-XP2F IOM V1.0-4.5 Page 12 of 35
4.2.4 Analog Outputs
The X35 has 4 analog outputs which transmit a standard 4-20mA signal to external devices. The analog
outputs always provide loop power, and the voltage of the loop power is the same as the voltage
applied to the X35 power supply (6 – 24 VDC). To have an external device (e.g. SCADA/PLC) receive the
4-20mA signal from the X35, wire the device as shown in
Figure 4.8
.
Figure 4.8