CKDZ CK4L-3000B series, Инструкция по эксплуатации

Страница: 15 / 26

CK4L-3000B instruction
Shenzhen Createk Electronics
·
www.ckdz.com
·
Tel: +86-755-26643017
·
Fax: +86-755-26644342
Address
：
Floor 2/3,8 Block,A Area,Tanglang Industry Zone,Xili Town,Nanshan District , 518055, Shenzhen City
Connector: Owen Zhong, E-mail: zhongke@ckdz.com , Mobile: +86 13714452125 Page 15 of 26
ITEM10:” PIP output width”: set the horizontal width of PIP output image to 384, it could
lock precise pixel. Press “
← ” or “ → ” to adjust the value and press “Enter” to save the setting.
ITEM11:” PIP output height”: set height of PIP output image to 288 by adjusting “Stp” to
select the value step. Press “
← ” or “ → ” to adjust the value and press “Enter” to save the setting.
ITEM12: “PIP output starting point-horizontal”: the horizontal starting point of PIP output
picture is set at the coordinate (0,0) which is on the top left corner. Press “←”or”→” to set the
starting point and press “Enter” to save the setting.
ITEM13: “PIP output starting point-vertical”: the vertical starting point of PIP output
picture is set at the coordinate (0,0) which is on the top left hand corner. So that to lock the
starting point and adjust precise pixel. Press “←”or”→” to set the starting point and press
“Enter” to save the setting.
ITEM14:” sub-window display”, open or close of PIP sub-window. Press “
← ” or “ → ” to
achieve the result. Press “Enter” to save it.
ITEM 15: “exit”: press “↑”to switch to the last item “exit”, press “←”or”→” to “exit” or
“cancel” , then press “enter” to confirm.
Pressing “Setup” under any setting stage will jump to the 15
th
item.
6. Introduction of CK4L3000B software
(3000B control software can only be operated in Windows operation system)
How to install the control software
Firstly, put CD into your computer.
Secondly, find the two files named „VisualBasicPowerPacksSetup‟ and „dotnetfx‟, install them
Finally, the software "ApplicationCK4L3000B.exe" can run successfully.
6.1 Basic Parameters Setting
6.1.1 Setup
Running the software ApplicationCK4L3000B.exe, connection setup dialog-box will show as
follow
For the shipped CK4L3000B product, the hardware configuration has been fixed. The control
software will has default value for all parameters. User should select the RS232 serial port for