CKDZ CK4L-3000B series, Инструкция по эксплуатации

Страница: 14 / 26

CK4L-3000B instruction
Shenzhen Createk Electronics
·
www.ckdz.com
·
Tel: +86-755-26643017
·
Fax: +86-755-26644342
Address
：
Floor 2/3,8 Block,A Area,Tanglang Industry Zone,Xili Town,Nanshan District , 518055, Shenzhen City
Connector: Owen Zhong, E-mail: zhongke@ckdz.com , Mobile: +86 13714452125 Page 14 of 26
(pixel lattice), you can calculate the start and end coordinate of outputs image. The size of output
image can be adjusted by changing the value of the parameters shown on above table. Press
“↑”
or
“↓”
to select the mode and
“←”
or
“ →”
to increase/reduce the values of parameters.
Then press “Enter” to save the setting.
5.1.3
Brightness /Contrast / Color
ITEM 7: “Brightness”
CK4L-3000 supports 100 degree of output brightness, “0” is the lowest and “100” is the
highest. Press
“←”
or
“ →”
to adjust the brightness and press “Enter” to save the setting. The
default setting is 50.
ITEM 8: “Contrast”
CK4L-3000 support 100 degree of output contrast, “0” is the lowest and “100” is the
highest. Press
“←”
or
“ →”
to adjust the contrast and press “Enter” to save the setting. The
default setting is 50.
ITEM 9 “Color”
Color saturation of video inputs such as V1
、
V2
、
V3
、
YpbPr and HDMI can be set. The
setting value is in between 0 – 100. “0” represents the lowest color saturation and “100”
represents the highest color saturation. Press
“←”
or
“ →”
to change the color value and
press
“
Enter
”
to save the setting. The default setting is 50.
5.1.4
Setting of capture content of input signal source (position/size setting)
CK4L-3100 supports different kind of input resolution capture, by setting input signal‟s
position/size, accurate at the following parameter.
After the size and position of video output are set which according to the size and resolution of
LED panel, we can also make adjustment of input content.
For example: if video Input/Output resolution is set at 1024X768 and in fact that, the resolution
of LED panel is 384X288, we can set the below parameters to capture only 384*288 area of
input signal source, in order to obtain an optimal size of video picture displayed on the LED
panel.
Item Number Function
10 Horizontal width
11 Vertical height
12 Starting point - horizontal
13 Starting point - vertical
CK4L3000B
(S) model set is as follows: