CKD KBX Series, Инструкция по эксплуатации

Страница: 8 / 29

5
■
1.2 For your safe operation
When you use the electric actuator KBX series, be sure to take the measures in conformity to the following
instruction:
This machine is an industrial robot in conformance to the provisions of Paragraph 31of Article 36 of the Ordinance on
Industrial Safety and Hygiene. Necessary cautions are specified in the "Selection", "Installation", "Use", "Periodic
Inspection, etc." and "Education" of the "Technical Guideline on Safety Standards for Use of Industrial Robot"
conforming to the Article 28 of the Industrial Safety and Health Law. You are requested to read them carefully and
to observe the instructions. The following introduces some of them.
■
1.2.1 Safety measures
(1) A safety barrier shall be provided to ensure that any person cannot enter the working area of a robot.
1. The barrier shall have sufficient strength to withstand
the force generated during the work or environmental
conditions. The barrier shall have such a structure
that cannot be easily adjusted, removed or cleared.
2. The safety barrier shall be free from any serrated or
sharp edge or protrusions.
3. The safety barrier shall be designed in a stationary
structure.
4. When a safety barrier is equipped with a door, an
interlock shall be provided so that the robot will be
stopped by opening of the door.
(2) An emergency stop device shall be installed where the robot can be easily stopped by the operator immediately
in the event of emergency.
1. The emergency stop function shall ensure immediate
and reliable stop of a robot when the emergency stop
button switch has been operated by an operator.
2. The emergency stop button shall be red.
3. The emergency stop device shall be located so that it
can be easily pulled, pressed or touched by the
operator, and it can block a beam of light.
4. The emergency stop button shall be structured in such
a way that it is not automatically reset after having
been operated, and cannot be reset carelessly.
(3) For safety, never modify the robot main unit or control device.
No
admittance
Emergency
stop button