49
48
11. N-Way Configuration
11. N-Way Configuration
11. N-Way Configuration
11. N-Way Configuration
50
51
11.1 Check Device
To Check the device is configured as N-Way controller or N-Way device,
perform following steps.
1- Connect the Wireless remote controller to the
device through the provided cable.
2- Press the "Navigation" button to enter Menu, then
select "N-Way Config" "Check Device".
3- Press "Yes" button to start checking the device.
If the device is a N-Way controller, the Wireless
remote controller will show "Device is N-Way
Control" If the device is a N-Way device, the
Wireless remote controller will show "Device is
N-Way Device" If the device is not a N-Way
controller or device, the Wireless remote controller
will show "Device is Not N-Way"
11.2 Remove N-Way Function of Device
To remove the N-Way function of a N-Way controller or N-Way device,
perform following steps.
1- Connect the Wireless remote controller to the
device through the provided cable
2- Press the "Navigation" button to enter Menu,
then select "N-Way Config" "Remove N-Way".
If the N-Way function is removed successfully,
the Wireless remote controller will show
"N-Way Config Success".
5- After configured the N-Way Device, the N-Way
controller will try to communicate with the
N-Way device wirelessly. If the N-Way controller
can communicate with the N-Way device
successfully, the Wireless remote controller will
show "N-Way Config Success". Otherwise, the
Wireless remote controller will show "N-Way
Config Fail".
If N-Way function is fail to configure, please
check:
- Whether the device is a N-Way device but
want to configure as N-Way controller.
- Whether the device is a N-Way controller but
want to configure as N-Way device.
- The power of the devices.
- The cable connection between the device and
Wireless remote controller.
- The wireless connection between two device.
(User may check the wireless connection by using
the Wireless remote controller to control the device which is
desired to configure as N-Way device at the
location of the device which is desired to configure
as N-Way controller.)
11.3 Configure the N-Way Function
To configure the N-Way function, perform following
steps.
1- Connect the Wireless remote controller to the
desired N-Way controller through the provided
cable.
2- Press the "Navigation" button to enter Menu, then
select "N-Way Config" "Config Device".
The Wireless remote controller will show
"Press Desired Controller", and the status LED of
connected device will keep flashing.
User may press the desired device control
button on the device to configure the control
button with N-Way Controller function.
When the desired control button is pressed,
the Wireless remote controller will show
"Controller set Finished"
3- After configured the desired controller, the
Wireless remote controller will show "Pls connect
other Device" and "Then Press "OK" Or
"Yes"".Connect the Wireless remote controller to
the desired N-Way device through the provided
cable and the press "Yes"button to configure
the N-Way device.
4- The Wireless remote controller will show "Press
Desired Device", and the status LED of connected
device will keep flashing.
User may press the desired device control
button on the device to configure the load of
device to be a N-Way device.
When the desired control button is pressed,
the Wireless remote controller will show "Device Set
Finished".
