41
40
9. System Setting
9. System Setting
9. System Setting
9. System Setting
42
43
9.2 Copy Setting
You are able to copy the setting of Wireless remote controller to another Wireless
remote controller through the provided cable. To copy the setting, perform follow steps:
1- Connect the source Wireless remote controller to a
destination Wireless remote controller through he
provided cable.
2- Press the "Navigation" button to enter Menu,
and then select "Setting" "Copy Setting" on
the source Wireless remote controller.
3- Press any button on destination Wireless
remote controller to wake up the remote.
4- Press "Yes" button on the source Wireless
remote controller to prepare to copy setting.
The destination Wireless remote controller will ask
user to accept the setting.
5- Press "Yes" button on the destination
Wireless remote controller to accept the setting.
6- After the setting is copied successfully,
both the source and destination Wireless remote
controller will show "Copy Setting Completed"
9.3 Reset
User may reset the Handheld remote to factory default setting and
all the setting of
the Wireless remote controller will be deleted.
To reset the Wireless remote controller, perform
following steps.
1- Press the "Navigation" button to enter Menu,
then select "Setting" "Reset"
2- Press "Yes" button to start reset the Wireless
remote controller.
The Wireless remote controller will show the
warning message "Reset will del all setting" and
then ask user to confirm.
3- If the user confirmes to delete all the
setting, press "Yes" button again to reset the
Wireless remote controller. Otherwise, press
"Back" button to cancel the reset.
4- After finishing reset process, the Wireless
remote controller will show "Reset Success".
9.4 Memory Information
User may inquire the memory information of the Wireless remote controller from the
setting menu ("Setting" "Memory info" ).
There are two types of memory information showing for the user-------- the" Registered
Device" and "Device Added to Gps and Moods".
9.4.1 Registered Device
The Wireless remote controller can register maximum 50 devices to the memory for
group or mood control. The number of device is referring to the number of
“
device loads
”
added to the Wireless remote controller.
There are some examples:
When user added the load of a one-gang switch to group 1 of the Handheld remote
controller,
the number of registered device is 1.
When user added the load of one-gang switch to group3, mood 1 and mood 2
of the Wireless remote controller,
the number of registered device is also 1.
When user added the "load 1" and "load 2" of a two-gang switch to group 1 of the
Wireless remote controller,
the number of registered device is 2.
When user added the "load 1" of a two-gang switch to group 1 and "load 2" of the same
two-gang switch to group 3 of the Wireless remote controller.
the number registered device is 2.
When user added the load of a socket to group 1 of the Wireless remote controller
the number of registered device is 1.
When user added the load of dimmer switch to group 1 of the Wireless remote controller
the number of registered device is 1.
9.4.2 Device Added to GPs and Moods
The Wireless remote controller can be added with
maximum 200 device records to the
memory for group or mood control.
There are some examples:
When user added the load of a one-gang switch to group 1of the Wireless remote
controller,
the number of registered device is 1.
the number of device added to Gps and Moods is 1
When user added the load of a one-gang switch to group 1, group 3, mood 1 and
mood 2 of the Wireless remote controller,
the number of registered device is 1.
the number of device added to Gps and Moods is 4.
When user added the both "load 1" and load2" of a two-gang switch to group 1 of the
Wireless remote controller,
the number of registered device is 2.
the number of of device added to Gps and Moods is 2.
When user added the "load 1" of a two-gang switch to group 1 and "load 2" of the
same two gang switch to group 3 of the Wireless remote controller,
the number of registered device is 2.
the number of device added to Gps and Moods is 2.
When user added the load of a socket to group 1 of the Wireless remote controller,
the number of registered device is 1.
the number of device added to Gps and Moods is 1.
When user added the load of a dimmer switch to group of the Wireless remote
controller,
the number of registered device is 1.
the number of of device added to Gps and Moods is 1
When user added the load of a socket to all the groups (group 1 to group 10) and all
the moods (mood 1 to mood 5) of the Wireless remote controller.
the number of registered device is 1.
the number of of device added to Gps and Moods is 15.
