Citronix ci5000 Series, Руководство по эксплуатации

Страница: 75 / 133

ci5000 Series Printer Operation Guide
Version 1.0
3-41
注意：必须确保图案的垂直方向的像素不能超过信息的点阵设定。如下图
所示。如果不是，请增加信息的点阵设定。
Print Adjust Parameters
喷印调整 喷印调整 喷印调整 喷印调整
Print Adjust Parameters are used to optimize how the message is printed so that the best quality/speed
and placement of the message can be achieved. The parameters are stored separately for each
message and can be adjusted while the printer is printing. This means two messages with the identical
content can be configured appropriately for two different production lines. The Print Adjust Parameters
can be accessed from the home screen by pressing the [Print Adjust] button located in the
Navigation Toolbar. This brings up the following screen (notice two pages). Each of the parameters is
discussed in turn below.
各喷印调整参数用于优化信息喷印以获得最佳的打印速度
/
质量以及信息的喷印位
置。每条信息的各个参数单独储存并且可以在喷印的时候调整。这意味着两条具有同样内容的信息可以适
当调整用于两条不同的产线。调整各喷印调整参数，在主菜单页面按位于快捷菜单区的“喷印调整” 键。
进入下图所示界面。每个参数在下文详细阐述。
Drop Size
墨点大小 墨点大小 墨点大小 墨点大小
Citronix printers are capable of being configured with 4 different drop sizes. Larger drops make the print
larger, darker or bolder. Smaller drops enable faster printing. It is possible to change between normal
and macro drop size using print adjust drop size. The following chart shows which drop sizes are
compatible with which printers.
喜多力可以编辑使用
4
种不同的墨点大小。较大点打印的字体更大，颜色