Citrix SD-WAN 110-WiFi-SE Quick Start Guide
8
Appliance physical installation procedure
and precautions
•
Horizontal or vertical mount
•
Install the equipment near an electrical outlet for easy access.
•
Place equipment in a rack with sufficient airflow for safe operation.
•
For a closed or multiple-unit rack assembly, the ambient operating temperature of
the rack environment might be greater than the ambient temperature of the room.
Therefore, consider the lowest and highest operating temperatures of the
equipment when making a decision about where to install the appliance in the
rack.
The Citrix SD-WAN 110-WiFi-SE appliance can be installed in the following installation
modes:
•
Desktop mount
•
Wall mount
•
Rack mount
Cautions
•
Electrostatic discharge (ESD) can damage your equipment.
•
Do not place any objects on the appliance.
•
Do not cover vent holes on the side of the appliance.
•
Surface of the appliance can get heated up.
•
Use caution when touching the surface of the appliance.
Electrical safety precautions
During installation or maintenance procedures, wear a grounding wrist strap to avoid ESD
damage to the electronics of the appliance. Use a conductive wrist strap attached to a
good earth ground or to the appliance. You can attach it to the connector beside the ESD
symbol on the back.
Follow basic electrical safety precautions to protect yourself from harm and the appliance
from damage.
Be aware of the location of the emergency power off (EPO) switch, so that you
can quickly remove power to the appliance if an electrical accident occurs.
Do not use mats designed to decrease static electrical discharge as protection
from electrical shock. Instead, use rubber mats that have been specifically
designed as electrical insulators.
