Citizen Eco Drive B740 Скачать руководство пользователя страница 9

F. Adjusting Time and Date (Time mode) 

How to adjust time 

Time can be adjusted in the Time mode. 

1. After turning the crown counterclockwise to unscrew it, pull the 

crown out to the time adjustment position (the second click stop 
position), the second hand will stop running. 

2. Set the watch for the correct time by turning the crown. 
3. Press the- crown in to the normal position and the watch (second 

hand) starts running. 

4. Turn the crown clockwise to screw it tightly against the case. 

When the crown is pulled to the time adjustment position, the function 
hand points at the "O" second position. If the function hand does not 
point at the "O" second position, correct the hand position referring to 
section "J. Setting Function Hand at "O" Position. 

The watch shows time and date in the 

Time mode. 

Time (shown by hour, minute, second 
and 24-hour hands) and date can be 
checked any time regardless of the 
mode.

How to adjust date 

Besides time and date, the function 
hand indicates the battery power at 
three levels. 

<Note on operation of the crown> 

x

The crown of this watch is designed to be screwed down onto the case 
to secure the water-resistance of the watch. 

x

For pulling out the crown for adjustment, unscrew it to get it loose 
first.

x

After adjustment with the crown, press it in to the normal position 
and then screw it down with- out fail. 

x

Do not operate any button while the crown is being pulled out. If a 
button is operated in such the status, it may cause some change in the 
indication or disorder of some hand(s). 

Do not pull out or turn the crown 

when the watch gets wet or is in the 
water.
Otherwise, the watch loses water-
resistance and the inside of the 
watch gets wet.

1. After turning the crown counterclockwise to unscrew it, pull the 

crown out to the date adjustment position (the first click stop 
position).

2. Set the watch for the correct date by turning the crown. 
3. Press the crown in to the normal position. 
4. Turn the crown clockwise to screw it tightly against the case. 

Note:

If date is adjusted when the watch shows a time between 9:00 PM 

and 1:00 am, the watch may not advance the date indication the next 
morning.

Return to Table of Contents

Return to Table of Contents

Содержание Eco Drive B740





















Отзывы: