Citizen CBM-272, Руководство пользователя

Страница: 49 / 157

— 30 —
4.16 Red/Black Print (Precautions for Use)
(1) Types of paper
The red and black two-color thermal paper changes its colors by controlling
the energy applied to the thermal head. It is largely divided into two types,
depending on the color development order. Select either of them to suit your
application.
1. Red-based two-color thermal paper (PB670: MITSUBISHI PAPER)
Red print (low energy)
→
Black print (high energy)
2. Black-based two-color thermal paper (735FA: RICOH)
Black print (low energy)
→
Red print (high energy)
(2) High-energy printing rate
High-energy print (black print on red-based paper, or red print on black-based
paper) required the application of high energy to the thermal head. To protect
the service life of the thermal head, use the following printing ratio as a
guideline. Also use the default printing rate.
1. Continuous print of high-energy print only
: 6 % or less
2. Mixed continuous print of low-energy and high-energy print
: 30 % or less of the
standard printing rate of
12.5 %
3. Printing rate per dot line : 50 % or less
(3) Minimum dots for high-energy print
When high-energy print is used, the recommended minimum area is 3 dots
(length) x 3 dots (width) or more. Depending on the set printing density, the
paper used, or the printing characters, a sufficient change of color tone may
not be obtained even by high-energy print.
(Characters such as [, !, ', (, i, -, font B with small dot matrix)
It is recommended to use in such printing patterns as double-width characters,
double-height characters, double-width and -height characters.
CAUTIONS
• If high-energy print is continuously carried out at a high operating ambient
temperature, the thermal head will become hot more quickly and the protective
circuit will be activated, to stop printing more frequently.
Fully consider the working temperature and printing rate.
• If a bar code is printed on the two-color paper, both colors may appear in normal
print and high-energy print, or the bar code may not be correctly read by a bar code
reader. Be fully aware of this when using the two-color paper.
• Do not perform high-energy print on the single-color paper (regular thermal paper).
It may deteriorate the service life of the thermal head or the printing quality.
• For setting, see Commands (DC3: Switching the Red/Black Printing).