Citizen CBM-270, Руководство пользователя

Страница: 86 / 114

CBM-270 User’s Manual
CITIZEN 86
GS C2 n1 n2
[Function] Setting the numbering counter
[Code] <1D>H<43>H<3B>H<N1><3B>H<N2><3B>H<N3><3B>H<N4><3B>H
<N5><3B>H
<1D>H<43>H<32>H<n1><n2>
[Range] 0 £ n1 £ 255, 0 £ n2 £ 255
[Outline] This command sets the numbering (serial number counter) value.
n1 + n2
´
256 (n1 = remainder, n2 = quotient) becomes a counter value.
[Caution] If the counter is set with this command, a repeat count of the identical counter
will be cleared. If the counter value is beyond the Range specified with the "GS
C1" or "GS C;" command, the counter will be initialized.
[Default] Not defined.
[See Also] GS C0, GS C1, GS c, GS C ;
[Sample Program] [Print Result]
See the sample program and print result for the GS C1 command on Page 82.
GS C; N1; N2; N3; N4; N5;
[Function] Setting the numbering counter mode (B)
[Code] <1D>H<43>H<3B>H<N1><3B>H<N2><3B>H<N3><3B>H<N4><3B>H
<N5><3B>H
<N1>, <N2>, <N3>, <N4>, and <N5> are character codes.
[Range] 0
£
N1, N2, N5
£
65535 0
£
N3, N4
£
255
[Outline] This command sets the numbering (serial number counter) mode and a counter
value.
N1 : Counter default
N2 : Counter final value
N3 : Counter step value
N4 : Identical counter print count
N5 : Counter start value
N1<N2 : Count-up system
N1>N2 : Count-down system
N1 = N2
or
N3 = 0 : Counter stop
or
N4 = 0