Citizen CBM-270 Скачать руководство пользователя

Страница: 72 / 114

CBM-270 User’s Manual

CITIZEN

JAN-13(EAN) This bar code, consisting of numerals only, has a fixed length of 13 columns; a

12-column number entered from the host or application software plus a check

column(13th column) automatically calculated inside the printer. If the 13th-

column numeral is sent from the host, the entire bar code will be printed as it is.

JAN-8(EAN) This bar code, consisting of numerals only, has a fixed length of 8 columns; a 7-

column number entered from the host or application software plus a check

column(8th column) automatically calculated inside the printer. If the 8th-

column numeral is sent from the host, the entire bar code will be printed as it is.

CODE39

This bar code, consisting of uppercase alphabets and numerals, has a variable

length of columns. A start/stop code "*" is automatically added by the printer.

Available characters include a space and " $ % * +

. / 0 1 2 3 4 5 6 7 8 9 " and

uppercase alphabets.

ITF

This bar code, consisting of numerals only, has a variable length of even digits.

If an odd-column code is transferred, nothing will be printed.

CODABAR (NW-7)

This bar code, consisting of alphanumerals, has a variable length of columns.
Available characters include " 0 1 2 3 4 5 6 7 8 9 A B C D $ +

. / : " A start/stop

code is required; any one of A, B, C, and D is used.

CODE128

This bar code consists of all of 128 ASCII code characters and has a variable

length of columns. This printer supports the code subsets A, B, and C. By

prefixing a transfer code with any one character of A, B, and C, you can select the

code subset to start from. If not prefixed with A, B, or C, the code subset B will be

selected.

The code subset A is the bar code consisting of standard uppercase alphabets,

numerals, symbols, and special codes.

The code subset B is the bar code consisting of standard uppercase/lowercase

alphabets, numerals, symbols, control codes, and special codes.

The code subset C is the bar code consisting of special characters and 100

kinds of numbers ranging from 00 to 99.

The check digit automatically calculated inside the printer is added to the end

of the entered columns to be printed.

Processing of the special characters

      The characters above the ASCII code number 96 are considered special
      characters. The following lists the converted characters for entering these
   characters.

Содержание CBM-270



















































































































Результаты поиска

Содержание CBM-270

Отзывы:

Похожие инструкции для CBM-270

Бренды по названию

Популярные бренды

Citizen CBM-270, Руководство пользователя

Результаты поиска

Содержание CBM-270

Отзывы:

Похожие инструкции для CBM-270

Бренды по названию

Популярные бренды