— 40 —
ESC T n
[Function]
Selecting the character printing direction in PAGE MODE
[Code]
<1B>H<54>H<n>
[Range]
0
n
3
48
n
51
[Outline]
Selects the direction and start point of character printing in
PAGE MODE.
n
Printing direction
Start point
0, 48
Left to right
Top left (“A” in the figure)
1, 49
Bottom to top
Bottom left (“B” in the figure)
2, 50
Right to left
Bottom right (“C” in the figure)
3, 51
Top to bottom
Top right (“D” in the figure)
[Caution]
• When STANDARD MODE is selected, this command only
executes the internal flagging of the printer without affecting
the printing in STANDARD MODE.
• The character mapping position will be the start point of the
print area specified by ESC W.
• The basic calculation pitch (x or y) used by the following
commands varies with the start point.
(1) If the start point is the top left or bottom right (The
characters are mapped in the direction perpendicular to
the paper feed),
• Commands using x: ESC SP, ESC S, ESC \
• Commands using y: ESC 3, ESC J, GS $, GS \
(2) If the start point is the top right or bottom left (The
characters are mapped in the paper feed direction),
• Commands using x: ESC 3, ESC J, GS $, GS \
• Commands using y: ESC SP, ESC S, ESC \
[Default]
n = 0
[See Also]
ESC $, ESC L, ESC W, ESC \, GS $, GS P, GS \
Print Area
Paper Feed Direction
Reference
Содержание BD2-1220
Страница 2: ...REVISION Rev No Date Content Rev 1 00 Jun 10th 2001 First created ...
Страница 64: ... 62 Printed above and below Print Results No HRI characters Printed above Printed below ...
Страница 100: ... 98 yL yH 256 8dots 768dots Example When xL 64 xH 0 yL 96 yH 0 xL xH 256 8dots 512dots ...