25
Controller
10. Check to make sure all terminals are tightened
properly. Please do this after the power is off.
Y
11. Clean the surface of the controller.
Y
12. Check if the solenoid is in order, checking its
touching point.
Y
Motor
13. Check to see if any water gets in. Check if it
becomes too hot.
Y
14. Check to see if the carbon brush should be
replaced.
Y
15. Check to see if the accelerator pedal works well
and if it can be released freely and automatically.
Y
Periodic Maintenance Chart –
Cont’d
Chassis and body
16. Check to see if the brake drum and the brake
shoe should be replaced or not.
Y
17. Check to make sure the hand brake functions.
(Applicable for vehicle with hand brake).
Y
18. Check the hose and tube for the brake to see if
any liquid is leaking. (Applicable for vehicle with
hydraulic brake).
Y
19. Check the brake fluid level, to make sure it is
enough. (Applicable for vehicle with hydraulic brake).
Y
20. Check the air pressure inside the tires, check to
see if the tire surface is worn, and check to see if the
lug nuts are tightened properly.
Y
21. Check to see if the shock absorber has any oil
leaking, is flat or makes any abnormal noise.
Y
22. Check to see if there is oil leaking on the gear box
and the rear end.
Y
23. Add the lubricant inside the wheel hub and
steering system.
Y
24. Adjust the toe-in of the front end.
Y
25. Clean the body and seat.
Y
After above maintenance, drive the vehicle to check if the vehicle works properly.
9. Location of Fuses
1.) Blade fuses & fuse box
All the accessory fuses (8 pieces for DC system, 9 pcs for AC system) are installed in the fuse box which is
located in the left side of the seat pod.
Содержание Street Legal
Страница 6: ...6 2 Controls 1 Schematic Figure of controls Fig 1 Fig 2 Fig 3 ...
Страница 27: ...27 ...