citEcar Street Legal, Руководство пользователя

Страница: 11 / 28

11
6) High beam headlight indicator —— indicates the high beam headlight is on.
7) Low beam headlight indicator —— indicates the low beam headlight is on.
8) Reverse indicator —— indicates F/R switch is on ‘Reverse’ position and vehicle is in reverse.
9) Parking brake indicator—— indicates that the parking brake is engaged, you must release the parking
brake when ready to drive the vehicle.
3.
OPERATION
Starting
1) Press the F/R to the neutral if it’s not already there.
2) Insert the ignition key and turn it to the second position.
3) Press the F/R switch and lock it to the desired position.
4) Release the parking brake
a. If it’s equipped with hand park brake, release the hand parking brake as instructed above.
b. If it’s equipped with EM brake, and the system of the vehicle is DC system, press the brake switch to
upper part.
c. If it’s equipped with EM brake, and the system of the vehicle is AC system, when step on the
accelerator pedal, the EM brake will release automatically.
5) Step down the accelerator pedal slowly and smoothly, the vehicle will start to move.
WARNING!
Do not step down the accelerator pedal when turning on the power key, otherwise, the vehicle may
suddenly start moving.
WARNING!
If the accelerator pedal is stepped down before the power key is switched on, the car will not run. In
this case, you should release the accelerator pedal first, then turn the power key to ON position,
then step down the accelerator pedal again, the vehicle will start moving.
CAUTION:
Slow down the speed of the vehicle to less than 10mph before turning the vehicle!
Stopping
To stop the vehicle, gradually press down on the brake pedal. When the vehicle stops, apply the parking
brake and turn the power key to OFF position and pull out the key, press the F/R switch to the neutral
position.
CAUTION:
Do not hold the vehicle on an incline with the accelerator, please use the brake.
4. Safe Operation Instructions
Our electric vehicle is designed for simple operation. However, please make sure to observe the following
safe operation instructions:
BEFORE OPERATING THE VEHICLE:
ALWAYS read this first before you start driving the vehicle.
ONLY authorized people should drive this vehicle, from the driver’s side ONLY.
Do not drive this vehicle on a public road before it’s registered and the license plate is attached.
Drive the vehicle ONLY in areas where it is allowed to be used by law or local regulations and the
conditions are safe to do so.
DO NOT allow more than the recommended number of people on the vehicle (1 person per seatbelt).
DO NOT overload the vehicle in any case, otherwise the motor may be damaged, the vehicle may also
lose control and/or the driver and passengers will be in danger.