23
3) Remove the jack.
If the tire is flat, remove the wheel and inflate the tire to the maximum recommended pressure for the tire.
Immerse the tire in water to locate the leak and mark with chalk. Place tire plug according to the
manufacturer’s specifications.
5.8 Brake Adjustment
WARNING!
If you have any problem with the brakes, please consult our dealers. Brake failure can result in
serious accident or physical danger.
The brakes on the vehicle can be self-adjusted.
Before you operate the vehicle, please press down on the brake pedal several times to make sure the
brakes are functioning properly.
Check and replace the brake shoe periodically.
6. Lubrication
1) Use 90GL hypoid gear oil - 1 liter for the rear end.
2) Lubrication points: a. Spindle assembly (driver side and passenger side); b. Middle shaft; c. Rear end;
Spindle (Passenger Side)
Spindle (Driver Side)
Rear End
Middle Shaft
7. Running-in of new vehicle
In order to guarantee the performance of the vehicle and enhance its reliability and working life, its parts
should experience a certain period of running-in before it works under peak load. Each new vehicle is
required to give one month of running-in time or 1000kms running-in distance, detail procedure is as per the
following.
1. Before running-in, please check the capacity of oil, electrolyte and brake oil, if any one of these are low,
please fill it accordingly.
2. The tire pressure should be inflated to the rated pressure marked on the tire.
3. Limit the speed of the vehicle to maintain the current of the vehicle at under 40A during driving.
4. Check often and tighten regularly the fixing parts of each of the connecting points.
WARNING!
1) To avoid any damage on the brake shoe, the handbrake should be released to its bottom before starting
the vehicle.
Содержание Street Legal
Страница 6: ...6 2 Controls 1 Schematic Figure of controls Fig 1 Fig 2 Fig 3 ...
Страница 27: ...27 ...
