Page 49
Instructions
In operation, coasting of basket increases, making it necessary to
readjust reversing timer.
CAUTION
Failure to do this will cause the thermal overload units for the
basket to cut-out unnecessarily and probably damage the
gear reducer.
Adjustment of reversing timer dwell time
CAUTION
Dryer power supply must be shut off before adjusting timer.
The dwell time is the time from when the motor turns “off”, to when it
turns “on” again in the opposite direction.
Turning the dwell adjustment knob counter-clockwise increases the
dwell time and turning it clockwise decreases the dwell time.
Recommended dwell time for the basket to stop completely is 5 to 7
seconds. Minimum basket stopping time is
4 seconds.
NOTE
Select non-reversing or reversing before starting dryer.
NOTE
Fan rotates counter-clockwise as viewed from back end of
motor. See arrow on motor support. to change rotation, reverse
power leads L1 and L2.
DRYERS WITH REVERSING CONTROL TIMER
INSTRUCTIONS FOR
DRYERS WITH
REVERSING CONTROL
TIMER
Содержание HD170
