Cissell C150G, Руководство пользователя

Страница: 46 / 67

Page 46
Basket Alignment for 150 lb. Dryers
I N S T R U C T I O N S
1 . Loosen bolts number one (1) through five (5).
2 . Place pin “A” in position shown in figures 1 and 2.
3 . Check pins “B” at position shown in figures 1 and 2
for equal clearance.
4 . If pin “B” clearance is unequal, adjust at nut #6.
5 . When clearance at pin “B” is correct, tighten bolts
#1 in the following order, as viewed from rear of
dryer, top right, bottom left, top left and bottom
right.
6 . Tighten bolts #5 until flush against back of dryer.
Tighten lock nut #4 to secure bolt #5 in position.
7 . Tighten bolts #2 and #3.
8 . Remove pin “A” and check for proper clearance at
points “A” and “B”. If clearance is incorrect, repeat
the above steps.
N O T E
Use short sections of round steel rod for pins or
drill bits may be used in place of round rod.
INSTRUCTIONS FOR
ALIGNING BASKETS
ON 150 LB. DRYERS