Configuring the Cisco WVC210 Internet Camera Software
Setup > Advance Settings
WVC210 Wireless-G PTZ Internet Video Camera With 2-Way Audio Administration Guide
54
8
Setup > Advance Settings
The Setup > Advance Settings window has options for RTSP/RTP and Other.
RTSP/RTP
Real Time Streaming Protocol (RTSP) is a standard for connected client(s) to
control streaming data (MPEG-4) over the World Wide Web. Real-Time Transport
Protocol (RTP) is an Internet protocol used for transmitting single real-time
multimedia data such as audio and video to a select group of connected clients.
RTSP uses RTP to format packets of multimedia content.
•
RTSP Port—Enter the RTSP Port number (between 1024 to 65535) in the
field provided. The default RTSP port is 554.
•
RTP Data Port—The camera’s data port number has been pre-configured
and can be used for multicasting. It does not normally need to be re-
configured. If a port number does need to be changed, please contact your
network administrator. If a change is necessary, enter the data port number
(1024 to 65494, even numbers only) in the field provided. The default RTP
port is 5000.
•
Max RTP Data Packet—Allows you to define the maximum size of the RTP
data packets. The length can be between 400 to 1400 bytes. The default
value is 1400 bytes.