Cisco UCS C220 M3, Инструкция по установке и обслуживанию

Страница: 65 / 134

3-25
Cisco UCS C220 Server Installation and Service Guide
OL-25760-01
Chapter 3 Maintaining the Server
Installing or Replacing Server Components
Figure 3-13 CPU Heatsink and Socket
1
3
2
332093
1
CPU retaining latch,
3
Hinged CPU cover plate
2
CPU retaining latch, –
Step 2
Remove a protective cap or an old CPU from the socket (if present):
•
If you are removing an old CPU, skip to Step 3 .
•
If you are installing a new CPU to a socket that was shipped empty, the socket has a protective cap
that is intended to prevent bent contact pins. Use the tool as shown in
Figure 3-14 to grasp the
protective cap and then pivot to remove the cap.
Figure 3-14 Protective Cap Removal Tool
333565
Step 3
Remove an old CPU:
a.
Set the Pick-and-Place tool on the CPU in the socket, aligning the arrow on the tool with the
registration mark on the socket (the small triangular mark). See
Figure 3-15 .
b.
Press the top button on the tool to grasp the installed CPU.
c.
Lift the tool and CPU straight up.