Cisco UCS 3223-16UP Скачать руководство пользователя страница 53 | Manualshive

Страница: 53 / 80

background image

Step 4

Insert the transceiver into the port:

• If the transceiver has a Mylar tab, position the transceiver with the tab on the bottom, and then gently

insert the transceiver into the port until it clicks into place.

• If the transceiver has a bale clasp, position the transceiver with the clasp on the bottom, close the clasp

by pushing it up over the transceiver, and then gently insert the transceiver into the port until it clicks
into place.

If the transceiver does not install easily, ensure that it is correctly positioned and the tab or clasp are in the
correct position before continuing.

Caution

If you cannot install the cable into the transceiver, insert or leave the dust plug in the cable end of the transceiver.

Note

Removing an SFP Transceiver

Procedure

Step 1

Attach an ESD wrist strap and follow the instructions for its use.

Step 2

If a cable is installed in the transceiver, do the following:

a) Record the cable and port connections for later reference.
b) Press the release latch on the cable, grasp the connector near the connection point, and gently pull the

connector from the transceiver.

c) Insert a dust plug into the cable end of the transceiver.

Step 3

Remove the transceiver from the port:

• If the transceiver has a Mylar tab latch, gently pull the tab straight out (do not twist), and then pull the

transceiver out of the port.

• If the transceiver has a bale clasp latch, open the clasp by pressing it downwards, and then pull the

transceiver out of the port.

If you have difficulty removing a bale clasp SFP transceiver, reseat the SFP by returning the bale
clasp to the up position. Press the SFP inward and upward into the cage. Next, lower the bale clasp
and pull the SFP straight out with a slight upward lifting force. Be careful not to damage the port
cage during this process.

Note

Step 4

Insert a dust cover into the port end of the transceiver and place the transceiver on an antistatic mat or into a
static-shielding bag if you plan to return it to the factory.

Step 5

If another transceiver is not being installed, protect the optical cage by inserting a clean cover.

Cisco UCS 6300 Series Fabric Interconnect Hardware Installation Guide

51

Connecting the Cisco UCS 6300 Series Fabric Interconnect

Removing an SFP Transceiver

«
...
51
52
53
54
55
...
»

Содержание UCS 3223-16UP

















































































Отзывы:

Нет отзывов

Похожие инструкции для UCS 3223-16UP

dominion kx III

Бренд: Raritan Страницы: 6

Бренд: Raritan Страницы: 5

DOMINION KSX II

Бренд: Raritan Страницы: 7

Бренд: Raritan Страницы: 2

ETHERNET Accessories 852 852-0111

Бренд: WAGO Страницы: 38

Бренд: Enttec Страницы: 22

Бренд: Grozone Control Страницы: 20

Бренд: Shinybow USA Страницы: 16

Бренд: HDTV Supply Страницы: 15

Бренд: Lindy Страницы: 5

Бренд: Articona Страницы: 2

Бренд: Atlona Страницы: 22

Бренд: Black Box Страницы: 2

EXT-HDMI-CAT5-844

Бренд: Gefen Страницы: 28

Бренд: FIBERROAD Страницы: 30

ENTERTAINMENT HUB

Бренд: Ev-ent Hire Страницы: 5

stiro RWS-211D/N

Бренд: Zamel Страницы: 11

Бренд: Foxtel Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды